data brief for further information contact your local stmicroelectronics sales office. september 2011 doc id 17708 rev 3 1/3 3 STM3210E-EVAL STM3210E-EVAL evaluation board features three 5 v power supply options: ?power jack ? usb connector ? daughterboard boot from user flash, system memory or sram i2s audio dac, stereo audio jack 128 mbyte microsd card? or bigger both a and b type smartcard support 64 or 128 mbit serial flash, 512 kx16 sram, 512 mbit or 1 gbit nand flash and 128 mbit nor flash i2c/smbus compatible serial interface temperature sensor two rs-232 channels with rts/cts handshake support on one channel irda transceiver usb 2.0 full speed connection can 2.0a/b compliant connection inductor motor control connector jtag and trace debug support 240x320 tft color lcd joystick with 4-direction control and selector reset, wakeup, tamper and user buttons 4 color leds rtc with backup battery description the STM3210E-EVAL evaluation board is a complete development platform for stmicroelectronic's arm cortex-m3 core-based stm32f103zet6 or stm32f103zgt6 microcontroller. the range of hardware features on the board help you to evaluate all peripherals (lcd, spi flash, usart, irda, usb, audio, can bus, smartcard, microsd card, nor flash, nand flash, sram, temperature sensor, audio dac and motor control) and develop your own applications. extension headers make it easy to connect a daughterboard or wrapping board for your specific application. table 1. device summary order code reference STM3210E-EVAL stm32f103zet6 or stm32f103zgt6 evaluation board www.st.com
STM3210E-EVAL 2/3 doc id 17708 rev 3 STM3210E-EVAL hardware block diagram figure 1 is a block diagram of the STM3210E-EVAL hardware. figure 1. hardware block diagram demonstration software demonstration software is preloaded in the board?s flash memory for easy demonstration of the device peripherals in stand-alone mode. for more information and to download the latest version (version 1.1 or later is required), refer to www.st.com. revision history table 2. document revision history date revision changes 06-aug-2010 1 initial release. 29-oct-2010 2 modified microcontroller. 23-sep-2011 3 added reference stm32f103zgt6.
STM3210E-EVAL doc id 17708 rev 3 3/3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2011 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
